Ducati Monster 750 – Knight LED-Lenkerendenblinker-Paar

✔️ New part
ID: 15701311095110

€139,90 EUR

DELIVERY
Ready to ship | in 2-6 business days
Delivery with DHL in 4-9 business days.
PRODUCT DESCRIPTION

Buy together and save 10%

Ducati Monster 750 – Knight LED-Lenkerendenblinker-Paar€139,90+2 × LED-Blinker Lastwiderstand 8,2 Ohm / 25 W – 1 Stück€14,95
Together:€169,80€152,82

Harmonious proportions on the Monster 750—right through to the bar ends

The Ducati Monster 750 is defined by balanced proportions and an uncluttered appearance. With the Knight LED bar-end turn signal pair you relocate the turn signals to a position that complements the silhouette and makes the cockpit appear visually lighter.

With E-mark approval: a genuine advantage

This product is a pair of LED bar-end turn signals with E-mark approval. The advantage: an approved version and a clean, premium appearance on the bike.

Installation: clearance is key

The crucial factors are the handlebar fitment and clearance. Check that there is enough space at the bar ends and that the turn signals can operate freely. Depending on the configuration, M8/M10 and suitable brackets may be relevant; also pay attention to the connectionsto ensure that the wiring is routed neatly.

LED information: resistors only if required

If the flash rate is too high, an optional set with two load resistors (one per side) can be selected below the buy button. Important: the resistors become hot and must therefore be mounted on metal.

Scope of delivery and handlebar dimensions

  • Rubber adapters with Ø 13, 17 and 20 mm for steel and aluminum handlebars are included.
  • Suitable for handlebars with an inner diameter of 13 to 22 mm.

Description

Harmonious proportions on the Monster 750—right through to the bar ends

The Ducati Monster 750 is defined by balanced proportions and an uncluttered appearance. With the Knight LED bar-end turn signal pair you relocate the turn signals to a position that complements the silhouette and makes the cockpit appear visually lighter.

With E-mark approval: a genuine advantage

This product is a pair of LED bar-end turn signals with E-mark approval. The advantage: an approved version and a clean, premium appearance on the bike.

Installation: clearance is key

The crucial factors are the handlebar fitment and clearance. Check that there is enough space at the bar ends and that the turn signals can operate freely. Depending on the configuration, M8/M10 and suitable brackets may be relevant; also pay attention to the connectionsto ensure that the wiring is routed neatly.

LED information: resistors only if required

If the flash rate is too high, an optional set with two load resistors (one per side) can be selected below the buy button. Important: the resistors become hot and must therefore be mounted on metal.

Scope of delivery and handlebar dimensions

  • Rubber adapters with Ø 13, 17 and 20 mm for steel and aluminum handlebars are included.
  • Suitable for handlebars with an inner diameter of 13 to 22 mm.
Question about this article